1. Inspect the Exterior: Start by inspecting the exterior of your house for any damage or areas that may need special attention.
  2. Gather Supplies: Gather all the necessary supplies including a pressure washer, chemical injector, sodium hypochlorite solution, surfactant, safety gear, ladder, and brushes.
  3. Choose the Right Cleaning Solution: Mix sodium hypochlorite solution with water according to manufacturer’s instructions and add a surfactant to help the solution adhere to the mold.
  4. Prep the Area: Remove any obstacles such as furniture, plants, or decorations from around the house.
  5. Protect Nearby Plants: Cover nearby plants and shrubs with plastic sheeting to prevent damage from the cleaning solution.
  6. Wet the Area: Use a hose to thoroughly wet down the area you’ll be cleaning.
  7. Prepare Chemical Mixture: Pour the sodium hypochlorite solution mixed with water and surfactant into the chemical injector.
  8. Start from the Bottom: Begin washing from the bottom of the house and work your way up to ensure that dirt and grime are effectively removed.
  9. Use Low Pressure: Set the pressure washer to low pressure to avoid damaging the siding or paint.
  10. Maintain Proper Distance: Keep the pressure washer nozzle at a safe distance from the surface to prevent damage and ensure even cleaning.
  11. Apply Chemical Solution: Use the pressure washer with the chemical injector to apply the sodium hypochlorite solution to the surface, focusing on areas with mold or mildew.
  12. Allow Chemical to Dwell: Allow the cleaning solution to dwell on the surface for a few minutes to effectively kill mold and mildew.
  13. Scrub Stubborn Stains: For stubborn stains, use a brush or scrubbing pad to agitate the cleaning solution.
  14. Rinse Thoroughly: After applying the cleaning solution, thoroughly rinse the house from top to bottom with clean water.
  15. Pay Attention to Corners and Edges: Make sure to clean corners, edges, and other hard-to-reach areas where dirt and grime may accumulate.
  16. Avoid Lingering on One Spot: Keep the pressure washer moving to prevent streaks or damage from concentrated pressure.
  17. Be Careful with Windows and Doors: Use lower pressure and avoid spraying directly at windows and doors to prevent water from seeping inside.
  18. Inspect for Missed Spots: After rinsing, inspect the entire house for any missed spots or areas that need additional cleaning.
  19. Repeat if Necessary: If there are still stubborn stains remaining, repeat the cleaning process until the desired results are achieved.
  20. Clean Gutters and Downspouts: While cleaning the exterior, take the opportunity to clean gutters and downspouts of debris.
  21. Inspect for Damage: While cleaning, keep an eye out for any signs of damage such as cracks, loose siding, or peeling paint.
  22. Make Repairs: If you notice any damage, make note of it and plan to make repairs once the house is dry.
  23. Allow for Drying Time: Allow the house to dry completely before replacing any furniture or decorations.
  24. Dispose of Waste Properly: Dispose of any leftover cleaning solution and waste materials properly according to local regulations.
  25. Clean Up Equipment: Rinse out the pressure washer and cleaning equipment thoroughly after use to prevent damage and corrosion.
House Wash Daytona Beach - Pressure Washing Daytona Beach - Seabreeze Sparkle Pressure Washing Daytona Beach


Leave a Reply

Your email address will not be published. Required fields are marked *

Verified by MonsterInsights